BLACK FRIDAY!

10% off with code BF10. Limited time only!

Time left - It remains - 9h:16m:

Installation of Family Tree BD-FR-10

1. Product Contents:

  • Family tree divided into 10 parts (9 branch parts, 1 trunk part)
  • 12 photo frames (16x11 cm each)
  • 1 larger photo frame (31x21 cm)

2. Installing the Family Tree:

  1. All parts (trunk, branches, and frames) are securely packed in a protective wooden template. Carefully remove each piece by peeling off the yellow tape from the back. You can arrange the branches and photo frames in any layout you prefer. This guide follows the setup shown in the illustration for a matching wood grain direction (if you purchased the wood decor option). All parts, except the frames, come with double-sided foam tape on the back. Peel off the protective film to stick each piece to the wall.
  2. Preparation: Measure the area on the wall where you plan to place the family tree. The final layout will measure 162x138 cm. The width is the overall width of the tree on the wall, and the height is from the base of the trunk to the highest leaf. Section 4 shows the layout of the tree with numbered photo frames. Arrange the tree on the floor first to visualize the layout. This step helps you decide on the exact placement of each part and ensures the layout is just as you want it.
  3. Starting the Assembly: Begin by positioning the trunk. The branches will extend outward from each side, as shown in the illustration. Attach the trunk to the wall first. Once adhered, it will be difficult to reposition. Ensure the trunk is perfectly straight—its flat top edges should be level with the wall to keep the alignment correct.
  4. Attaching Remaining Parts:

    1. After the trunk, attach photo frames 1 through 8, as detailed in Section 3, “Photo Frame Installation + Attaching the Photo.” Aim to keep even spacing between frames.
    2. Next, attach frames 9 through 12, finishing with the final frame, number 13.
    3. Once the frames are securely in place, attach the 9 branch parts according to the illustration.
  5. Your family tree is now beautifully displayed on the wall. Time to celebrate! :)

3. Photo Frame Installation + Attaching Photos:

  • Before attaching any of the 13 frames to the wall, stick the photo to the back of the frame.
  • Peel off the photo tape and place the photo carefully in position.
  • After securing the photo, place white adhesive gum on the back of the frame, then carefully attach it to the wall.

4. Layout of Family Tree Parts on the Wall

The illustration below shows the layout and numbered frames. Refer to this section as needed during installation to match the recommended arrangement.