3D DIY Wall Clock Sticker - Oraculum
Walnut 
Plus a special Tree of Life worth 15€ on orders above 75€.
We ensure your products in order are safely packed during transport.
The Oraculum 3D wooden wall clock is a tasteful solution for stylish people looking for a unique decoration and clock in one. This designer clock is suitable for the kitchen or living room, where their oversized size will not escape any gaze.
We guarantee that you will fall in love with our wooden clock and it will become an unmissable decoration of every wall. Thanks to the silent operation of the mechanism, it is suitable to place the clock even in rooms where people sleep.
Main advantages of wooden clock:
- The clock serves as a design accessory
- Adhesive numbers available in several decors
- Oversized size after sticking
- The clock is made from wood
- The hands are made of quality walnut
- Silent operation of the mechanism
- Luxurious design
Note: When choosing a decor, you are choosing the decor of adhesive numbers. The color of the wooden hands and the steel cover is unchangeable.
Product installation:
We provide detailed installation instructions for the adhesive clock, where the hanging of the mechanism on the wall, the installation of the hands and the sticking of all parts of the clock on the wall are explained, along with a clear photo documentation step by step.
Technical information:
- The size of the clock after sticking on the wall is 100x100 cm
- The height of each number is 74 mm
- The size of the steel cover is 12 cm
- The clock only includes an hour and minute hand
- The clock is powered by a silent mechanism without ticking
- The mechanism is 16 mm thick. The distance of the clock from the wall after hanging will therefore be 16 mm
- The mechanism is powered by a standard AA battery with a voltage of 1.3 - 1.7 V
- AA battery is not included in the package
- 2-year warranty on the product
Package contents:
- 3D adhesive clock numbers with pre-applied foam tape
- Silent clock mechanism mounted in a black steel cover
- Wooden luxury hands made of solid walnut
- Clear product installation guide
Procedure:
- Preparing for Installation: Measure the area where you’ll mount the adhesive clock. The placement of the numbers and adhesive parts can be customized, but using the dimensions provided with your order is recommended. Identify the center point of the clock on the wall; this will serve as the anchor for the entire installation.
- Mounting the Clock Mechanism: The clock mechanism is pre-mounted in a steel casing with a hook on the back for easy hanging. After measuring, place a nail in the exact center of your chosen spot (at the top of the steel casing, where the hook is located), and hang the clock mechanism on it.
- Using the Placement Template: Included in the package is a template with a circle and 12 divisions (like a clock face) and a black dot in the center. Make a hole in the dot and slide the template through the clock's metal center until it touches the steel casing. Rotate the template so the lines align as clock positions.
- Marking Clock Number Positions: Use the included tape measure to determine the distance of each adhesive number from the center. For example, if the final clock size is 150 cm, the distance from the center is 75 cm. Place the end of the tape measure at the center of the mechanism and align it with each line on the template. Mark 12 dots on the wall, one at each line, ensuring they’re equally spaced from the center.
- Attaching Clock Numbers and Adhesive Parts:
- Prepare the clock’s adhesive parts by peeling off the green protective film on the back.
- Stick each part to the corresponding dot, centering each piece carefully. Don’t press too firmly initially so you can adjust if needed.
- For two-digit numbers (like 10, 11, 12), use the provided template to ensure equal spacing between digits.
- Once all parts are positioned, step back to check alignment. If adjustments are necessary, carefully peel and reposition. When everything is correct, press each part firmly against the wall.
Installation Clock Hands, Battery, setting the Time:
- To install the hands, first unscrew the small brass screw on the mechanism’s front.
- Unpack hands from the bag. the hour hand (shorter with a larger hole) and the minute hand (longer with a smaller hole). Remove any protective film if present.
- On the hands may be protective film. If present, carefully remove it. Black hands have a transparent film. Silver hands may have blue film or none. Gold and wooden hands do not have film.
- Mounting the hands:
- Insert the hour hand first, pressing gently around its base for a secure fit. Our tip: press around the perimeters, "semicircles," do not press the ends of the hands to avoid bending them.
- Then, insert the minute hand into the groove on the mechanism.
- Place the brass screw on top to secure both hands.
- Checking and Adjusting the Hands: Look at the clock from the side to ensure the hands don't cross. If they do, slightly bend the minute hand at the base (not at the end of the hand).
- Choosing and Installing the Battery:
- Use a high-quality AA alkaline battery with a voltage between 1.3 - 1.7 V. Avoid rechargeable, old, or zinc-chloride batteries, as these may cause malfunction.
- Insert the battery following the polarity indicators on the mechanism.
- Setting the time: - Set the clock to 12:00 by aligning the hands, then use the black wheel on the back of the mechanism to adjust to the correct time.
- Finally, re-hang the clock on the wall using the hook, for example on a nail.
FAQ
An assembly manual is provided with every order.
The assembly instructions for a specific product can always be found on the product page next to the product description tab.
General wall mounting instructions for our products can be found HERE.
If you are interested in a size that is in between the ones we offer, please email us with your request at dublez@dublez.com . If you would like an even larger size than what is listed, also contact us via email. Our graphic department will assess whether it is possible to produce a different size.
All our products are manufactured in our DUBLEZ workshop in Slovakia (Europe). 95% of the materials we use for our products are produced in the EU, with nearly all coming from the Czech Republic/Slovakia. Products from our main material supplier meet the strictest standards enforced by the California Air Resources Board which applies stringent quality control conditions for air quality and pollutants. Additionally, the supplier's products are certified by the Programme for the Endorsement of Forest Certification (PEFC), and the wood used for these products comes from verified and well-managed forests, ensuring a renewable and sustainable source.
It is possible to detect a certain smell or odor from our products upon unpacking. Some may find this smell pleasant, while others may not. It is an aroma that results from the manufacturing process. The smell will naturally dissipate within 10 days of unpacking.
The foam tape you applied to the wall is very strong. The product will definitely not fall off the plaster. If you decide to remove the sign after some time, we recommend proceeding very carefully. Ideally, it would be best to first cut the foam from the wall with a long sharp knife from behind the product, and then carefully peel off the remainder that stays on the wall. Since there are various types of plasters, it is necessary to also adapt to the structure and composition of yours.
Since we manufacture products from wooden materials, the answer is debatable. If the product is not directly exposed to rain or splashing water, it should not be a problem. However, it is necessary to consider the varying humidity of the outdoor air and temperature. As wood is a living material, these fluctuations can cause, for example, slight bending of the material. Therefore, in such cases, we recommend mounting the product on the wall with small-headed nails. Thanks to the nail heads, the product will be securely pressed against the wall, ensuring its stability. The number of nails depends on the product.
Since the products are made to order, once the order is placed, they are scheduled for production. The speed of scheduling depends on the selected shipping method. The delivery time is approximate and may be shorter or longer. In case of an extended order processing time, we will promptly inform the customer.
On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
All products are placed in the production queue the moment the order is sent. The material required for production is always in stock. On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
After selecting the decor and size, you need to Add the product to the cart. The shopping cart is located on the page at the top right. You then need to fill in: email address, billing and shipping details, choose a shipping method and payment method. Finally, just send the order.
If you still have trouble ordering, it is possible that you made a mistake in one of the steps of the shopping process. In this case, we recommend reading the guide on how to order. The guide advises the customer "step by step". If you still have issues with purchasing, please contact our customer support.
Yes, we safely package our products to ensure they arrive in good condition. Most products are placed in a protective template, and all products are further wrapped in bubble wrap. They are delivered in sturdy cardboard made from 5-layer corrugated board.
It is possible that most of our products are received in a protective wooden template made of the same material as the product. This template is attached to the product with paper adhesive tape on the back. After peeling off the paper tape, you can easily remove the product from the template. The template serves to safely transport the goods to you, to prevent damage to the product. The template is packaging material and is not part of the product itself. Damage to the template cannot be considered as a claim against the goods, as it is packaging material and serves only for the safe delivery of the goods.
If you did not receive a confirmation email when sending the order or if you are not receiving emails related to order changes, one of the following scenarios may have occurred:
- Your email was sent to spam - In this case, it is necessary to check the "spam" or "junk mail" folder. With G-mail and other email providers, it can happen that the provider marks the email as spam.
- The email address entered in the order is incorrectly written - When sending an order, it is important that the email address filled out is valid. In this case, we recommend contacting our customer support, where we can change the email to the correct one and you will also receive an email with the order.
- Your email inbox is full - If your email inbox is full, it is not possible to receive new emails, including emails from us. To be able to receive emails, it is necessary to free up space in the email inbox, e.g., by deleting older emails.
- You did not send the order - If the order was not sent at checkout with the button used to send the order and you were not redirected to a thank you screen, it is likely that the order was not sent. In this case, we also recommend contacting customer support.
Almost all of our products feature a small, subtle logo of our company. The logo is tiny and not very noticeable. If you would like to remove the logo nonetheless, so that it is not engraved on the product, it is possible. You will need to inform us in advance so that we can add this service to your order.
You can add this service through the following link HERE.
