Wooden 3D World Map with Marked State Borders
Plus a special Tree of Life worth 15€ on orders above 75€.
We ensure your products in order are safely packed during transport.
Wooden 3D World Map on the wall is an original and modern picture that should not be missing in the home of any passionate traveler. The picture is suitable for the living room, children's room or office on the wall. Individual continents and islands are cut out of wood. The world atlas is detailed and contains almost all known islands of the world and thanks to the engraved borders also all countries of the world.
Main advantages of the wooden world map:
- Modern design
- Detailed map processing
- Ideal gift for a traveler
- Easy installation on the wall
- All borders of the world's countries are engraved on the map with a thin delicate line
Product installation:
Attaching the world map on the wall is done simply through pre-adhered foam tape, which is stuck on the other side of the continents. Islands and smaller parts are placed on the wall through adhesive tape, which is part of the package. Thanks to this special tape, you can easily stick all the islands on the wall. Just cut off a small piece, stick it on the other side of the material and press it firmly against the wall.
Note:
- The size of the map is the size after spreading the picture on the wall according to the illustrative picture.
- With the map in the size of 260x136 cm, Eurasia is divided into two parts. The divide copies the borders of the Russian region of Krasnoyarsk and the republics of the Russian Federation Khakassia and Altai. Then the joint copies the real borders of the countries up to India, so in that part the joint is invisible.
Package contents:
- Wooden 3D World Map with marked state borders
- Pre-adhered foam tape on continents
- Product installation + Illustrative picture of the layout of continents and islands
- Foam adhesive tape for attaching islands to the wall in the package
We have prepared a detailed guide on how to easily and flawlessly stick our DUBLEZ world map on your wall. Let's get started :)
Installation Guide for the DUBLEZ World Map:
- Installation in pairs: We recommend applying the map in pairs. One person will stick the individual parts of the map to the wall, while the other checks from a distance if the parts are correctly placed.
- Measuring the wall space: First, measure the wall where you will be mounting the map.
- Laying out the map on the floor: Before actual installation, we recommend laying out the map on the floor 'dryly' to better plan the final layout on the wall.
- Distance between America and Eurasia (the Atlantic Ocean) is arbitrary. If you need the map to be a few cm narrower or wider, you can achieve this by adjusting the width of the Atlantic Ocean. If you want to use the exact distance, we recommend using our template included with the world map, which helps you determine the precise width between North America and Europe. It all depends on what will look better on your wall.
- Foam tape: The map has pre-applied foam tape on the backside of the continents. Just peel off the green protective film from the tape and you can start sticking the map. Be careful because once you press the foam tape onto the wall, you cannot remove it as it is very strong.
- Islands: Smaller islands can be stuck to the wall using adhesive foam tape included in the package. The adhesive foam tape is pre-cut into strips. Simply cut the desired size for each island from the strips and then you can stick the island to the wall. Just use a small amount of tape and press firmly against the wall. The tape is strong.
- Installation process:
- First, we recommend sticking either North America or Eurasia first (some variants have Africa connected to Eurasia). Ensure the continent is positioned correctly according to the illustration to avoid any crookedness.
- Once the first part is stuck, use our included template (the distance between Europe and North America) to align it with the stuck part and stick the second part of the map.
- Now you can stick Africa by aligning it with Eurasia if you have purchased a map size where Africa is separately detached.
- Next, you can stick the islands in Asia using the templates included in the package. First, apply the template named "Japan" next to Asia and stick all 3 islands of Japan. Then, apply the template named "Southeast Asia - Islands" also to the southeastern part of Asia, which allows you to stick all the islands located in this area. Additionally, this template helps you stick Australia, as part of the template's edge traces the continent of Australia.
- In the next step, stick the two large remaining parts, South America and Greenland. Position Greenland approximately as it suits you.
- In the final step, stick all the remaining islands that are left in the package and are marked on the illustrative image.
- Final adjustments: After successfully sticking the map, it is important to press the map and all islands (from the front side) firmly against the wall at all places where the foam tape is located, to ensure the tape properly bonds with the wall.
- Wait 24 hours for the adhesive in the foam tape to reach full strength.
- Then press the map and islands again by hand at all places where the foam tape is located.
- Enjoy your new DUBLEZ map :)
Illustrative Image of the DUBLEZ World Map After Installation on the Wall:
Note:
- Installation responsibility lies with the customer - We take no responsibility for any failure or peeling of the product from the wall. In many cases, successful placement depends on the composition of the plaster, the perimeter and internal wall (wall temperature), and the correct installation procedure.
- Removing the product with foam adhesive tape - Since the foam adhesive tape is very strong, we recommend first cutting the foam from behind the product with a thin (and preferably for large products, long) knife. You can then very carefully peel off the remaining foam on the wall.
- The map package includes only the continents and islands shown in the illustrative image.
FAQ
An assembly manual is provided with every order.
The assembly instructions for a specific product can always be found on the product page next to the product description tab.
General wall mounting instructions for our products can be found HERE.
If you are interested in a size that is in between the ones we offer, please email us with your request at dublez@dublez.com . If you would like an even larger size than what is listed, also contact us via email. Our graphic department will assess whether it is possible to produce a different size.
All our products are manufactured in our DUBLEZ workshop in Slovakia (Europe). 95% of the materials we use for our products are produced in the EU, with nearly all coming from the Czech Republic/Slovakia. Products from our main material supplier meet the strictest standards enforced by the California Air Resources Board which applies stringent quality control conditions for air quality and pollutants. Additionally, the supplier's products are certified by the Programme for the Endorsement of Forest Certification (PEFC), and the wood used for these products comes from verified and well-managed forests, ensuring a renewable and sustainable source.
It is possible to detect a certain smell or odor from our products upon unpacking. Some may find this smell pleasant, while others may not. It is an aroma that results from the manufacturing process. The smell will naturally dissipate within 10 days of unpacking.
The foam tape you applied to the wall is very strong. The product will definitely not fall off the plaster. If you decide to remove the sign after some time, we recommend proceeding very carefully. Ideally, it would be best to first cut the foam from the wall with a long sharp knife from behind the product, and then carefully peel off the remainder that stays on the wall. Since there are various types of plasters, it is necessary to also adapt to the structure and composition of yours.
Since we manufacture products from wooden materials, the answer is debatable. If the product is not directly exposed to rain or splashing water, it should not be a problem. However, it is necessary to consider the varying humidity of the outdoor air and temperature. As wood is a living material, these fluctuations can cause, for example, slight bending of the material. Therefore, in such cases, we recommend mounting the product on the wall with small-headed nails. Thanks to the nail heads, the product will be securely pressed against the wall, ensuring its stability. The number of nails depends on the product.
Almost all of our products feature a small, subtle logo of our company. The logo is tiny and not very noticeable. If you would like to remove the logo nonetheless, so that it is not engraved on the product, it is possible. You will need to inform us in advance so that we can add this service to your order.
You can add this service through the following link HERE.
Yes, we safely package our products to ensure they arrive in good condition. Most products are placed in a protective template, and all products are further wrapped in bubble wrap. They are delivered in sturdy cardboard made from 5-layer corrugated board.
In most cases, damage is caused by the shipping company. You can leave the claim process with the carrier to us; we will handle everything on our behalf. To initiate the claim process with the carrier, we will need you to send photo documentation of the package to the email dublez@dublez.com, including:
- Detail of the damage/damages.
- Photograph of the entire product (if possible, including the template and it can also show bubble wrap in the background to make it clear to the carrier that the product was safely packaged).
- Photograph of the cardboard box from both sides. If the product arrived damaged, the damage is usually visible on the box as well.
It is possible that most of our products are received in a protective wooden template made of the same material as the product. This template is attached to the product with paper adhesive tape on the back. After peeling off the paper tape, you can easily remove the product from the template. The template serves to safely transport the goods to you, to prevent damage to the product. The template is packaging material and is not part of the product itself. Damage to the template cannot be considered as a claim against the goods, as it is packaging material and serves only for the safe delivery of the goods.
Since the products are made to order, once the order is placed, they are scheduled for production. The speed of scheduling depends on the selected shipping method. The delivery time is approximate and may be shorter or longer. In case of an extended order processing time, we will promptly inform the customer.
On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
All products are placed in the production queue the moment the order is sent. The material required for production is always in stock. On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
After selecting the decor and size, you need to Add the product to the cart. The shopping cart is located on the page at the top right. You then need to fill in: email address, billing and shipping details, choose a shipping method and payment method. Finally, just send the order.
If you still have trouble ordering, it is possible that you made a mistake in one of the steps of the shopping process. In this case, we recommend reading the guide on how to order. The guide advises the customer "step by step". If you still have issues with purchasing, please contact our customer support.
If you did not receive a confirmation email when sending the order or if you are not receiving emails related to order changes, one of the following scenarios may have occurred:
- Your email was sent to spam - In this case, it is necessary to check the "spam" or "junk mail" folder. With G-mail and other email providers, it can happen that the provider marks the email as spam.
- The email address entered in the order is incorrectly written - When sending an order, it is important that the email address filled out is valid. In this case, we recommend contacting our customer support, where we can change the email to the correct one and you will also receive an email with the order.
- Your email inbox is full - If your email inbox is full, it is not possible to receive new emails, including emails from us. To be able to receive emails, it is necessary to free up space in the email inbox, e.g., by deleting older emails.
- You did not send the order - If the order was not sent at checkout with the button used to send the order and you were not redirected to a thank you screen, it is likely that the order was not sent. In this case, we also recommend contacting customer support.
We are both a manufacturer and a seller. This allows us to keep quality under control :) Take a look behind the scenes of production at DUBLEZ and discover how your dream home decorations are made. We manufacture from wood, using the most advanced technologies on the market, with an emphasis on quality and detail of execution. We guarantee safe packaging of products, ensuring that they arrive safely at your home.
Choose reliability and shop with us:
- We are a verified manufacturer
- Suitable for all plasters
- 99% customer satisfaction
- Easy installation
- Free exchange within 30 days
- 3-year warranty
