Wooden 3D World Map with Marked State Borders
We melted the prices! ☀️ Summer sale with up to -30% off. ⏳ Limited time only!
We ensure your products in order are safely packed during transport.
Trusted by over 70,000 customers.
Because beautiful wooden art deserves to be discovered everywhere.
Wooden 3D World Map on the wall is an original and modern picture that should not be missing in the home of any passionate traveler. The picture is suitable for the living room, children's room or office on the wall. Individual continents and islands are cut out of wood. The world atlas is detailed and contains almost all known islands of the world and thanks to the engraved borders also all countries of the world.
Main advantages of the wooden world map:
- Modern design
- Detailed map processing
- Ideal gift for a traveler
- Easy installation on the wall
- All borders of the world's countries are engraved on the map with a thin delicate line
Product installation:
On the back of the product, there is pre-glued foam tape. You stick the islands on the wall using a special adhesive tape, which is included in the package.
Note:
- The size of the map is the size after spreading the picture on the wall according to the illustrative picture.
- With the map in the size of 260x136 cm, Eurasia is divided into two parts. The divide copies the borders of the Russian region of Krasnoyarsk and the republics of the Russian Federation Khakassia and Altai. Then the joint copies the real borders of the countries up to India, so in that part the joint is invisible.
Wooden Quality That Lasts for Years
The product is cut using laser technology from a wooden HDF board – a high-density fibreboard made by compressing wood fibers and resin under pressure. The material is durable (3 mm thick), dimensionally stable, with a smooth surface. Thanks to its strength, we're able to cut even fine, delicate details.
You can choose from 12 semi-matte finishes, offering increased resistance to everyday scratches. The 3 mm thickness gives the product a subtle 3D effect with soft shading, making it look clean and elegant on the wall – unlike thin paper stickers.
The board meets the European E1 emission standard – it’s safe and suitable for indoor use (including children's rooms).
What's in the Package?
- Wooden 3D World Map with marked state borders with pre-glued foam tape for attachment
- Product installation + Illustrative picture of the layout of continents and islands
- Navigation templates for islands
- Foam adhesive tape for attaching islands in the package
-
Quality processing -
Great tools for the correct layout of the map
Quality processing -
some states are missing - for example, South Sudan, Lesotho, East Timor, or Kosovo are not marked on the map at all.
-
The Persian Gulf was not cut out
-
Taiwan is completely missing
some states are missing - for example, South Sudan, Lesotho, East Timor, or Kosovo are not marked on the map at all.
-
Great price, excellent communication with the store, care in packaging, quality, and a clear installation guide.
-
There could have been more glues for separate islands; we had to use a different adhesive for a few pieces.
-
Material
-
Delivery status
-
Color selection
-
Delivery speed
-
Tasmania is missing
-
Too little double-sided tape delivered
-
Without state names
-
Without a pattern according to the original size
-
Very good communication, delivery according to requirements, everything perfect.
-
Nothing
Illustrative image of continent layout, islands, and templates:
Installation of a world map on the wall:
- You're about to experience something amazing! You will get to assemble the DUBLEZ world map yourself! By now, you've probably unpacked the box and are figuring out what each part means. Let's briefly and simply explain it. The package includes all parts of the map - continents, islands and navigation templates - to help you position each piece correctly. Use the templates to determine the spacing between continents, such as the distance between the Americas and Europe.
- Important information before installation:
- Pre-applied foam: Each continent comes with pre-applied foam tape for easy attachment
- Island: Foam tape for the islands is provided in a separate bag. Cut and apply this tape to each island before installation.
- Templates: Templates are included to assist with alignment but should not be attached to the wall. Remove each template after placing the corresponding map section.
- Installation assistance: We always recommend that you install the map with a partner for easier alignment.
- Pre-layout tip: Lay out the map on the floor first to visualize the arrangement. Once adhered to the wall, the pieces cannot be repositioned. This step helps prevent mistakes. To stick a part of the map on the wall, you'll need to remove the protective film from the foam tape.
- Prepare the wall: Measure the wall where you will mount the map. The final dimensions will match those of your purchased map if installed according to these instructions. The map width spans from the left edge of North America to the right edge of Russia, and the height from the bottom of South America to the top of Greenland.
- Installation: We recommend starting from the left side with North America. Use the template labeled “Atlantic Ocean” to measure the space between North America and Europe. Attach North America first, align the template, and then attach Europe (or Eurasia for smaller maps) next to it. The template includes a marked spot for "Saint Pierre" island. Stick this island as well. This forms the foundation of your map.
- Attach remaining large parts: - Attach South America to the bottom of North America. For larger maps with a separate Europe and Asia, connect these two sections, then attach Africa, aligning it at Egypt. Finally, position Greenland and Australia. Use the "Canada" template to align Greenland, which includes a spot for "Baffin Island". For Australia, use the "Asia Islands" template, adhering all marked islands along with Australia.
- Position smaller islands: Use the provided templates to place smaller islands precisely on the wall.
- Congratulations! Your DUBLEZ map is now successfully installed. Step back and admire your work!
Important notes:
- Customer responsibility: Installation is the customer’s responsibility. We are not liable for detachment or product failure due to wall surface, wall temperature, or installation methods.
- Removing the map:Foam tape is very strong, so if you need to remove the map, carefully cut the foam tape from behind each part with a thin knife. Afterward, gently peel off any remaining foam from the wall.
- Product Scope: The map includes only the continents and islands as shown in the illustrative image.
FAQ
An assembly manual is provided with every order.
The assembly instructions for a specific product can always be found on the product page next to the product description tab.
If the product also includes optional mounting accessories, we recommend purchasing the one that suits you best.
General wall mounting instructions for our products can be found HERE.
Yes, our customers often order our products as gifts for their loved ones. We do not include the invoice in the package, so you do not have to worry that the recipient will see the price of the gift. Invoices are sent exclusively in electronic form to the e-mail address you entered at checkout.
If you are ordering the product as a gift, it will be packed in the same standard way as other orders. We pack every package carefully, safely and tastefully, so the product arrives in perfect condition and looks nice from the moment it is unwrapped.
If you are interested in a size that is in between the ones we offer, please email us with your request at dublez@dublez.com . If you would like an even larger size than what is listed, also contact us via email. Our graphic department will assess whether it is possible to produce a different size.
We make every effort to ensure that all photographs and visualizations in our product galleries reflect the actual product as accurately as possible. However, slight differences may occur due to your display settings.
The actual color / decor may vary depending on factors such as the lighting in the room (intensity, natural light, artificial light) or the product's placement within the space.
Before choosing the size, we recommend measuring the space first where you want to place the decoration. The right size is important so that the product looks balanced and natural on the wall.
A size that is too small may get lost on a large wall and look out of place. On the other hand, a size that is too large may visually overwhelm the space and make the decoration look crowded.
We therefore recommend choosing a suitable size according to the width of the wall while also leaving enough free space around the decoration. Ideally, leave at least 20 cm from the edges of the wall or furniture so the space can “breathe” and the decoration stands out nicely.
Yes, after unpacking, the product may have a specific smell. This is a natural smell that occurs during the production process.
Some customers do not mind this smell or even find it pleasant, while others may notice it more intensely. However, there is no need to worry — this is normal and not a product defect.
After unpacking, leave the product to air out freely. The smell usually fades naturally within approximately 10 days.
Yes, the product can be removed from the wall later, but it is important to proceed very carefully. The foam tape we use is strong and reliably holds the product on the wall so that it does not fall off by itself.
If you decide to remove the product after some time, we recommend first carefully separating the foam tape from the wall. You can use a thin sharp knife, ideally a retractable utility knife, strong nylon thread or fishing line. Carefully slide the knife / nylon thread behind the product and slowly cut through the foam tape between the product and the wall.
Any tape residue left on the wall should then be removed gradually and without using excessive force. If the remaining foam tape sticks too firmly to the wall and there is a risk of pulling off the plaster, we recommend heating the tape with a hair dryer or heat gun so that the adhesive loosens. Since there are different types of plaster and wall surfaces, the result may depend on the structure and quality of your wall. When removing the product, we therefore recommend adjusting the method to the specific surface to minimize the risk of damaging the plaster or paint.
Our products are made from wood-based materials, so certain limitations should be taken into account when placing them in a humid environment.
If the product will not be directly exposed to rain, splashing water or constant contact with moisture, in most cases this should not be a problem. However, please keep in mind that wood is a natural material and may react to changes in humidity and temperature. Larger fluctuations may, for example, cause the material to bend slightly.
In such a case, we recommend attaching the product to the wall using small nails with a small head. The nail head helps press the product more firmly against the wall and reduces the risk of movement or deformation. The number of nails depends on the specific product, its size and shape.
We do not recommend placing the product in areas where it will be directly exposed to water, rain or long-term very high humidity.
All our products are made in the European Union, right in the heart of Europe, in Slovakia. We produce locally, honestly and with a strong focus on quality.
Up to 95% of the material we use in production comes from the European Union, with almost all of it sourced from Czechia or Slovakia. Materials from our main supplier meet strict quality and pollutant control standards according to the requirements of the California Air Resources Board.
The supplier’s materials are also certified under the PEFC programme, which supports responsible forest management. This means that the wood used in production comes from verified and sustainably managed sources.
If a photo in another decor is not shown in the product gallery, then we do not have such a photo available.
We have photographed the product Tree of Life Yesod in all decors to give you a better idea of what the decor actually looks like in a photo :)
If you are unsure which decor to choose, we recommend purchasing material samples.
We recommend cleaning our products with a dry duster or a slightly damp, well-wrung cloth. Clean the product carefully to avoid damaging its surface.
To vacuum the product, we recommend using only a soft attachment designed for dust removal. This will help prevent scratches or damage to the product's details.
We do not recommend using a wet cloth, harsh cleaning products, or excessive amounts of water.
We custom-make your order after it has been placed.
You can find the estimated delivery date when selecting the shipping method at checkout.
- Express delivery: Priority dispatch within 2 business days.
- Standard delivery: Dispatch within 4–6 business days.
- Products in stock: Automatic priority dispatch within 24 hours.
The delivery time is approximate. In 98% of cases, we always deliver the product within the estimated delivery time.
If the order has not been shipped yet, we can still change it. If you need to quickly change something in your order, it is important to contact us immediately so that it does not go into production. If you realize that you forgot to add another product to your cart, selected the wrong product size, or made a mistake in the delivery details, please contact our customer support as soon as possible.
The sooner you contact us, the greater the chance that we will be able to edit the order before it is produced or shipped.
Yes, we pack our products safely so they arrive to you in perfect condition. Most products are placed in a protective template, and all products are also wrapped in bubble wrap. They are delivered in sturdy cardboard made from 5-layer corrugated board.
Products that consist of several pieces may be packed in a smaller package than the total size of the product, as the individual parts are stacked on top of each other inside the package. There is therefore no need to worry that you have received a different product.
We ship most of our products in a protective wooden template, which is made from the same material as the product itself. The template is attached to the product with paper adhesive tape on the back side.
After removing the paper tape, you can simply take the product out of the template. The template is used for safe transport of the goods to reduce the risk of damage to the product during delivery.
Please note that the template is only packaging material and is not part of the product. Any damage to the template therefore cannot be accepted as a product claim, as it serves exclusively to protect the product during transport.
How to place an order: After selecting the design and size, you need to add the product to your cart. The shopping cart is located in the top right corner of the page. Then you need to fill in:
- Your e-mail address.
- Billing and delivery details.
- Choose the shipping method and payment method.
- Finally, simply submit the order.
If you still have trouble placing an order, it is possible that you made a mistake in one of the steps of the shopping process. In this case, we recommend reading the guide how to shop. The guide takes customers through the process step by step. If you continue to have problems with your purchase, please contact our customer support.
Technical error on the website: If you suspect that you cannot place an order due to a technical error on our e-shop, please contact us. If you can provide a description of the problem, a photo from your phone or a video of the error, it will help us a lot in resolving the technical issue.
Are you looking for products in stock that we dispatch within 24 hours? You can find all products in stock HERE.
All other products are added to the production queue at the moment the order is placed. We always have the material needed for production in stock. On the product page, you can see the earliest estimated delivery date. This date applies if you select the “Express delivery” shipping option. Standard delivery dates are available at checkout when choosing the shipping method.
If you did not receive a confirmation email when sending the order or if you are not receiving emails related to order changes, one of the following scenarios may have occurred:
- Your email was sent to spam - In this case, it is necessary to check the "spam" or "junk mail" folder. With G-mail and other email providers, it can happen that the provider marks the email as spam.
- The email address entered in the order is incorrectly written - When sending an order, it is important that the email address filled out is valid. In this case, we recommend contacting our customer support, where we can change the email to the correct one and you will also receive an email with the order.
- Your email inbox is full - If your email inbox is full, it is not possible to receive new emails, including emails from us. To be able to receive emails, it is necessary to free up space in the email inbox, e.g., by deleting older emails.
- You did not send the order - If the order was not sent at checkout with the button used to send the order and you were not redirected to a thank you screen, it is likely that the order was not sent. In this case, we also recommend contacting customer support.
Yes. If you would like to have, for example, your own text, dedication or favorite quote engraved on the product, feel free to contact us and send us your idea at dublez@dublez.com. Our graphic department will check whether the customization is possible.
Yes, if you are interested, contact us by e-mail with your idea or request for a custom product, or with a request to modify one of our existing products.
Our graphic department will assess your request and check the production possibilities. Many of our products were created based on ideas and requests from customers, so we will be happy to take a look at your idea.
If production is possible, we will prepare a suggested next step for you. If a specific solution is not suitable for production, we will be happy to recommend a similar product or another suitable alternative from our offer.
Almost all of our products feature a small DUBLEZ logo. The logo is subtle, small in size and does not look distracting on the product.
If you still wish to have the product without the logo, we can arrange for the logo not to be engraved on the product. However, you need to inform us about this request in advance, before production, so we can add it to your order.
The logo may not be present on all products, so if you are interested in having it removed, please contact us in advance.
You can add the logo removal service via the following link: HERE.
We are both a manufacturer and a seller. This allows us to keep quality under control :) Take a look behind the scenes of production at DUBLEZ and discover how your dream home decorations are made. We manufacture from wood, using the most advanced technologies on the market, with an emphasis on quality and detail of execution. We guarantee safe packaging of products, ensuring that they arrive safely at your home.
Choose reliability and shop with us:
- We are a verified manufacturer
- Suitable for all plasters
- 99% customer satisfaction
- Easy installation
- Free exchange within 30 days
- 3-year warranty
Get inspired by our customers
