Wooden Family Tree for Photos
Wenge 
Plus a special Tree of Life worth 15€ on orders above 75€.
We ensure your products in order are safely packed during transport.
Display your family photos and keep precious memories constantly in sight. Wooden family tree for photos will be an original decoration on the entire wall for any room. Create a tree full of life at home, which will grow and develop along with your family. The family tree is adhesive, making its placement very simple. All accessories in the illustrative photo are included in the package. The tree with photo frames is made from wood and due to its thickness, it creates a 3D effect.
Main advantages of the product:
- Beautiful decoration for the entire wall
- Many decors to choose from
- Two sizes available
- Creates a 3D effect due to its thickness
- Easy product installation
Product installation:
On the other side of the product, there is pre-applied double-sided foam tape, which makes it easy to stick the product on the wall.
The family tree can be purchased in two sizes:
- 150x135 cm - The tree itself is divided into 10 parts. The photo frames have a total dimension: 14x10 cm and the dimension of the photo for insertion is 9x13 cm; you simply stick the photo into it.
- 200x182 cm - The tree itself is divided into 10 parts. The photo frames have a total dimension: 16x11 cm and the dimension of the photo for insertion is 10x15 cm; you simply stick the photo into it.
The individual parts of the tree fit together. The arrangement of photo frames on the wall is arbitrary.
The family tree can also be purchased in two shapes:
- Left - The trunk is on the left side and the branches go to the right.
- Right - The trunk is on the right side and the branches go to the left.
Package contents:
- Wooden family tree divided into 10 parts + pre-applied foam tape on each part
- 10 pcs photo frames + pre-applied double-sided tape for photo (Fotokleber) + adhesive gum for attaching frames to the wall
- 1 pc separate bird
- Product installation
Note:
- We supply frames without glass.
- The specified dimension is the dimension of the entire tree after sticking it on the wall according to the illustrative photo.
1. Product contents:
- Family tree divided into 10 parts
- 10 photo frames
- 1 bird
2. Attaching photos to the frames:
- Before attaching a photo frame to the wall, stick the photo to the back of the frame first.
- First, remove the photo tape and then attach the photo to to frame.
- Once the photo is attached, place the white adhesive gum on the back of the frame and carefully stick it to the wall.
3. Installing the Family Tree:
- The family tree comes in two sizes – 150x135 cm and 200x182 cm. You also have two variants:
- Left variant – The trunk is on the left side.
- Right variant – The trunk is on the right side.
- All parts of the product are packed a protective wooden template. All parts of the product are packed in a protective wooden template. Carefully remove them by peeling off the yellow tape from the back. Note that you can arrange the photo frames and bird in any layout you prefer. This guide follows the assembly shown in the illustration below.
- All tree parts (except the frames) have pre-applied double-sided foam tape on the back. After peeling off the film, you can stick each part to the wall. If you purchased the tree in wood decor, the wood grain on each part will align in the same direction when assembled according to this guide. - Preparation: Measure the wall where you will place the family tree. When assambled, the tree will measure 150x135 cm or 200x182 cm, depending on the size you ordered. The width of the tree is measured from the leftmost to to rightmost parts and the height is from the bottom of the trunk to the highest leaf.its width once assembled on the wall.
- Assambly: Once you're 100% sure of the placement, you can begin assembling. The best thing you can do is first arrange the tree on the floor to visualise how it will look on the wall. This let's you identify part placements and plan the layout. Measure the trunk’s placement on the wall, noting that branches will extend on both sides. Begin with the trunk (the largest part, labeled part no. 1), and stick it to the wall. For the left variant of the 150x135 cm tree, leave a 17.5 cm margin from the left edge, or 107.5 cm if measuring from the right, as shown in the illustration. Positioning part no. 1 correctly is essential, as all other parts will align with it. Once attached, removing it will be difficult.
- Attaching Additional Parts: After the trunk, continue with parts 2, 3, and 4. Attach parts 5, 6, and 7 to part 4, and parts 8 and 10 to part 3. Attach part 9 to part 8.
- Attaching Photo Frames and Bird: - Use the white adhesive gum to attach the photo frames, placing them as you like. Finally, attach the bird in any position you choose.
- Congratulations! The family tree is now successfully installed :)
4. Illustrative image of the family tree layout (left variant):
The illustration shows the numbered parts of the family tree and photo frames. Below the illustrative image are marked dimensions of family tree for both size variants (150x135 cm and 200x182 cm). The sum of the three dimensions equals the width of the tree once attached to the wall. These measurements help guide you when attaching parts to the wall.
FAQ
An assembly manual is provided with every order.
The assembly instructions for a specific product can always be found on the product page next to the product description tab.
General wall mounting instructions for our products can be found HERE.
If you are interested in a size that is in between the ones we offer, please email us with your request at dublez@dublez.com . If you would like an even larger size than what is listed, also contact us via email. Our graphic department will assess whether it is possible to produce a different size.
All our products are manufactured in our DUBLEZ workshop in Slovakia (Europe). 95% of the materials we use for our products are produced in the EU, with nearly all coming from the Czech Republic/Slovakia. Products from our main material supplier meet the strictest standards enforced by the California Air Resources Board which applies stringent quality control conditions for air quality and pollutants. Additionally, the supplier's products are certified by the Programme for the Endorsement of Forest Certification (PEFC), and the wood used for these products comes from verified and well-managed forests, ensuring a renewable and sustainable source.
It is possible to detect a certain smell or odor from our products upon unpacking. Some may find this smell pleasant, while others may not. It is an aroma that results from the manufacturing process. The smell will naturally dissipate within 10 days of unpacking.
The foam tape you applied to the wall is very strong. The product will definitely not fall off the plaster. If you decide to remove the sign after some time, we recommend proceeding very carefully. Ideally, it would be best to first cut the foam from the wall with a long sharp knife from behind the product, and then carefully peel off the remainder that stays on the wall. Since there are various types of plasters, it is necessary to also adapt to the structure and composition of yours.
Since we manufacture products from wooden materials, the answer is debatable. If the product is not directly exposed to rain or splashing water, it should not be a problem. However, it is necessary to consider the varying humidity of the outdoor air and temperature. As wood is a living material, these fluctuations can cause, for example, slight bending of the material. Therefore, in such cases, we recommend mounting the product on the wall with small-headed nails. Thanks to the nail heads, the product will be securely pressed against the wall, ensuring its stability. The number of nails depends on the product.
Since the products are made to order, once the order is placed, they are scheduled for production. The speed of scheduling depends on the selected shipping method. The delivery time is approximate and may be shorter or longer. In case of an extended order processing time, we will promptly inform the customer.
On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
All products are placed in the production queue the moment the order is sent. The material required for production is always in stock. On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
After selecting the decor and size, you need to Add the product to the cart. The shopping cart is located on the page at the top right. You then need to fill in: email address, billing and shipping details, choose a shipping method and payment method. Finally, just send the order.
If you still have trouble ordering, it is possible that you made a mistake in one of the steps of the shopping process. In this case, we recommend reading the guide on how to order. The guide advises the customer "step by step". If you still have issues with purchasing, please contact our customer support.
Yes, we safely package our products to ensure they arrive in good condition. Most products are placed in a protective template, and all products are further wrapped in bubble wrap. They are delivered in sturdy cardboard made from 5-layer corrugated board.
It is possible that most of our products are received in a protective wooden template made of the same material as the product. This template is attached to the product with paper adhesive tape on the back. After peeling off the paper tape, you can easily remove the product from the template. The template serves to safely transport the goods to you, to prevent damage to the product. The template is packaging material and is not part of the product itself. Damage to the template cannot be considered as a claim against the goods, as it is packaging material and serves only for the safe delivery of the goods.
If you did not receive a confirmation email when sending the order or if you are not receiving emails related to order changes, one of the following scenarios may have occurred:
- Your email was sent to spam - In this case, it is necessary to check the "spam" or "junk mail" folder. With G-mail and other email providers, it can happen that the provider marks the email as spam.
- The email address entered in the order is incorrectly written - When sending an order, it is important that the email address filled out is valid. In this case, we recommend contacting our customer support, where we can change the email to the correct one and you will also receive an email with the order.
- Your email inbox is full - If your email inbox is full, it is not possible to receive new emails, including emails from us. To be able to receive emails, it is necessary to free up space in the email inbox, e.g., by deleting older emails.
- You did not send the order - If the order was not sent at checkout with the button used to send the order and you were not redirected to a thank you screen, it is likely that the order was not sent. In this case, we also recommend contacting customer support.
Almost all of our products feature a small, subtle logo of our company. The logo is tiny and not very noticeable. If you would like to remove the logo nonetheless, so that it is not engraved on the product, it is possible. You will need to inform us in advance so that we can add this service to your order.
You can add this service through the following link HERE.
We are both a manufacturer and a seller. This allows us to keep quality under control :) Take a look behind the scenes of production at DUBLEZ and discover how your dream home decorations are made. We manufacture from wood, using the most advanced technologies on the market, with an emphasis on quality and detail of execution. We guarantee safe packaging of products, ensuring that they arrive safely at your home.
Choose reliability and shop with us:
- We are a verified manufacturer
- Suitable for all plasters
- 99% customer satisfaction
- Easy installation
- Free exchange within 30 days
- 3-year warranty
