Cut-out Wooden Cross - Bethlehem
Maple 
Plus a special Tree of Life worth 15€ on orders above 75€.
We ensure your products in order are safely packed during transport.
BLACK FRIDAY is here! Get a 10% discount on everything with the code --> BF10. Don’t miss out!
A wooden cross as a Wall Sticker is a beautiful and traditional home accessory for the living room, hallway, or above the door. The cross is detailed with the Bethlehem story of the birth of Jesus Christ. This wall sticker will undoubtedly cozy up any home. It's not just an ordinary paper sticker, but a wooden 3 mm thick decor, which makes the sticker appear 3D on the wall.
Main product advantages:
- Beautiful decoration for the apartment
- Simple product installation
- Wooden 3 mm thick material
- Choice of various decors
Product installation:
In the case of the 21x30 cm variant, a pre-applied double-sided foam tape is attached to the back of the product, which allows you to easily stick the product on the wall.
For larger dimensions, the tape is not included in the package due to the excessive size of the product. We recommend hanging these size variants on the wall using a few small-headed nails or with assembly adhesive.
Package contents:
- Wooden cross on the wall
- Pre-applied foam adhesive tape (for the 21x30 cm size)
This guide serves as a general recommendation for products intended for wall installation. Some products come with more detailed installation instructions (e.g., family trees, maps, family calendars, picture frames, etc.). If you are unsure which type of installation is suitable for you, we recommend always checking the specific product on our website. The product description will always mention the recommended installation method.
Important note: Some products are packaged in bubble wrap for safety. Additionally, the products are often placed in a protective template made from the same material, which is taped to the back (where there is no decor). Carefully remove the tape from the back to safely take out the product (or all its parts) from the template.
Our installation tips:
- We recommend installing the product on the wall with a partner. It’s always helpful to have someone else check if the product is correctly placed from a distance.
- If the product consists of multiple parts, we suggest laying it out on the floor first, to better visualize the final placement and arrangement of each piece on the wall.
Types of Mounting:
- Pre-applied foam adhesive tape - If your product has pre-applied foam tape on the back, the installation is very simple. Foam tape is generally found on smaller products or those whose lower weight allows such a method of mounting. A detailed guide for mounting DUBLEZ products using foam tape can be found at this link.
- Unapplied foam tape - For some products (mostly smaller in size), you will receive foam tape in the package that is not pre-applied to the product. Cut the tape to the required dimensions according to the product and stick it to strategic spots on the back of the product. After applying the tape, remove the green film and attach it to the wall. Once attached, if you are sure of the placement on the wall, press firmly. Foam tape can also be ordered separately from us. One piece of foam tape equals 1 meter, divided into 10 individual 10 cm long strips. If you have purchased a product or size variant that does not include pre-applied foam tape, you can buy it separately and easily apply it to the back of the product at home. Instructions on how to correctly apply the tape to the product can be found HERE. Detailed installation instructions for DUBLEZ products using foam tape can be found at this link.
- Adhesive putty - Adhesive putty squares are used for small products where foam tape is not feasible. The putty can be divided into smaller pieces, stretched as needed, etc. The putty is initially hard, you need to take a piece, warm it in your fingers by rolling it for a few seconds, and then apply it to the product. It is used for attaching small and lightweight products to the wall. Do not use it for large products! After applying enough adhesive putty to several strategic places on the product, it needs to be firmly pressed against the wall. The putty hardens within a few hours and holds for years.
- Small nails - For large products intended for wall hanging, we recommend using small nails to secure them to the wall (nails are not included with the product and need to be purchased separately). If you want the product to sit flush against the wall, we suggest buying nails with small heads. The nail head will help press the product against the wall. Here's a tip from us: We don't recommend hammering the nails all the way into the wall. Leave a gap of at least 0.5 mm. In case you need to remove the product, you can easily lift the nails with pliers without damaging the product :)
- Assembly adhesive - Another option is to use assembly adhesive (e.g., Mamut), but in this case, removing it from the wall later can be challenging and may damage the plaster.
Note:
- The products are intended for indoor use – We do not recommend placing them outdoors or in damp or wet areas.
- The customer is responsible for product installation – We bear no responsibility for any failure or detachment of the product from the wall. In many cases, proper placement depends on the composition of the plaster, the outer and inner walls (wall temperature), and the correct installation process.
- Detaching a product with foam adhesive tape – Since the foam adhesive tape is very strong, we recommend first cutting the foam away from the product with a thin (preferably long, for larger products) knife from behind the product. Then, you can carefully peel off the remaining foam from the wall.
- If the product consists of multiple parts, we recommend first laying it out on the floor for a better visual guide before arranging the parts directly on the wall.
FAQ
An assembly manual is provided with every order.
The assembly instructions for a specific product can always be found on the product page next to the product description tab.
General wall mounting instructions for our products can be found HERE.
If you are interested in a size that is in between the ones we offer, please email us with your request at dublez@dublez.com . If you would like an even larger size than what is listed, also contact us via email. Our graphic department will assess whether it is possible to produce a different size.
All our products are manufactured in our DUBLEZ workshop in Slovakia (Europe). 95% of the materials we use for our products are produced in the EU, with nearly all coming from the Czech Republic/Slovakia. Products from our main material supplier meet the strictest standards enforced by the California Air Resources Board which applies stringent quality control conditions for air quality and pollutants. Additionally, the supplier's products are certified by the Programme for the Endorsement of Forest Certification (PEFC), and the wood used for these products comes from verified and well-managed forests, ensuring a renewable and sustainable source.
It is possible to detect a certain smell or odor from our products upon unpacking. Some may find this smell pleasant, while others may not. It is an aroma that results from the manufacturing process. The smell will naturally dissipate within 10 days of unpacking.
The foam tape you applied to the wall is very strong. The product will definitely not fall off the plaster. If you decide to remove the sign after some time, we recommend proceeding very carefully. Ideally, it would be best to first cut the foam from the wall with a long sharp knife from behind the product, and then carefully peel off the remainder that stays on the wall. Since there are various types of plasters, it is necessary to also adapt to the structure and composition of yours.
Since we manufacture products from wooden materials, the answer is debatable. If the product is not directly exposed to rain or splashing water, it should not be a problem. However, it is necessary to consider the varying humidity of the outdoor air and temperature. As wood is a living material, these fluctuations can cause, for example, slight bending of the material. Therefore, in such cases, we recommend mounting the product on the wall with small-headed nails. Thanks to the nail heads, the product will be securely pressed against the wall, ensuring its stability. The number of nails depends on the product.
Since the products are made to order, once the order is placed, they are scheduled for production. The speed of scheduling depends on the selected shipping method. The delivery time is approximate and may be shorter or longer. In case of an extended order processing time, we will promptly inform the customer.
On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
All products are placed in the production queue the moment the order is sent. The material required for production is always in stock. On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
After selecting the decor and size, you need to Add the product to the cart. The shopping cart is located on the page at the top right. You then need to fill in: email address, billing and shipping details, choose a shipping method and payment method. Finally, just send the order.
If you still have trouble ordering, it is possible that you made a mistake in one of the steps of the shopping process. In this case, we recommend reading the guide on how to order. The guide advises the customer "step by step". If you still have issues with purchasing, please contact our customer support.
Yes, we safely package our products to ensure they arrive in good condition. Most products are placed in a protective template, and all products are further wrapped in bubble wrap. They are delivered in sturdy cardboard made from 5-layer corrugated board.
It is possible that most of our products are received in a protective wooden template made of the same material as the product. This template is attached to the product with paper adhesive tape on the back. After peeling off the paper tape, you can easily remove the product from the template. The template serves to safely transport the goods to you, to prevent damage to the product. The template is packaging material and is not part of the product itself. Damage to the template cannot be considered as a claim against the goods, as it is packaging material and serves only for the safe delivery of the goods.
If you did not receive a confirmation email when sending the order or if you are not receiving emails related to order changes, one of the following scenarios may have occurred:
- Your email was sent to spam - In this case, it is necessary to check the "spam" or "junk mail" folder. With G-mail and other email providers, it can happen that the provider marks the email as spam.
- The email address entered in the order is incorrectly written - When sending an order, it is important that the email address filled out is valid. In this case, we recommend contacting our customer support, where we can change the email to the correct one and you will also receive an email with the order.
- Your email inbox is full - If your email inbox is full, it is not possible to receive new emails, including emails from us. To be able to receive emails, it is necessary to free up space in the email inbox, e.g., by deleting older emails.
- You did not send the order - If the order was not sent at checkout with the button used to send the order and you were not redirected to a thank you screen, it is likely that the order was not sent. In this case, we also recommend contacting customer support.
Almost all of our products feature a small, subtle logo of our company. The logo is tiny and not very noticeable. If you would like to remove the logo nonetheless, so that it is not engraved on the product, it is possible. You will need to inform us in advance so that we can add this service to your order.
You can add this service through the following link HERE.
We are both a manufacturer and a seller. This allows us to keep quality under control :) Take a look behind the scenes of production at DUBLEZ and discover how your dream home decorations are made. We manufacture from wood, using the most advanced technologies on the market, with an emphasis on quality and detail of execution. We guarantee safe packaging of products, ensuring that they arrive safely at your home.
Choose reliability and shop with us:
- We are a verified manufacturer
- Suitable for all plasters
- 99% customer satisfaction
- Easy installation
- Free exchange within 30 days
- 3-year warranty
