Wooden Retro Wall Art - Babetta 210
Black 
Plus a special Tree of Life worth 15€ on orders above 75€.
We ensure your products in order are safely packed during transport.
Retro Wooden Picture - Babetta 210 in realistic design is an original addition to your apartment or house. The legendary model Babetta is a popular moped among the older generation and will find its place on the wall of every lover of these motorcycles. The retro picture is suitable as a gift for a man for the hallway, living room, workshop or garage.
Main product advantages:
- Original gift for a man
- Unique retro design
- Easy wall installation
- Wooden material 3 mm thick
- A wide range of decors to choose from
Product installation:
In the case of the 21x25 cm variant, there is a pre-applied double-sided foam tape on the other side of the product, thanks to which you can easily stick the product on the wall.
For larger dimensions, the tape is not included in the package due to the excessive size of the product. We recommend hanging these size variants on the wall using a few small-headed nails or with assembly adhesive.
Package contents:
- Wooden retro picture - Babetta 210
- Pre-applied foam adhesive tape (for the 21x25 cm size)
This guide provides general recommendations for products designed for wall installation. Some items, such as family trees, maps, calendars, and picture frames, may have specific installation instructions. If you're unsure which mounting method is suitable, check the product description on our website, which will mention the recommended installation approach.
Important Note: For protection, some products are packaged in bubble wrap and may be secured in a protective template made from the same material. This template, taped to the back, safely holds all parts together. Carefully remove the tape from the back to take out the product.
Installation Tips:
- Partner Installation: We recommend installing the product with a partner. Having someone check placement from a distance can ensure it’s correctly positioned.
- Pre-Layout on Floor: For products with multiple parts, lay them out on the floor first to visualize the final arrangement before wall installation.
Types of Mounting:
- Pre-Applied Foam Adhesive Tape: For products with pre-applied foam tape, installation is straightforward. This method is usually used for smaller or lightweight items. (Detailed instructions for mounting with foam tape are available here.)
- Unapplied Foam Tape: Some products include foam tape that isn't pre-applied. Cut the tape to fit and apply it to key points on the back of the product. After applying the tape, remove the green film and attach the product to the wall. Once positioned, press firmly to secure it. Foam tape is also available for purchase separately. One meter of tape is divided into 10 strips, each 10 cm long, which can be trimmed as needed. Instructions for applying foam tape are available here. Detailed installation instructions for DUBLEZ products using foam tape can be found at this link.
- Adhesive Putty: Adhesive putty is ideal for small, lightweight products where foam tape isn’t feasible. To use, warm the putty between your fingers to soften it, then apply it to the product. Press the product firmly against the wall. The putty will harden in a few hours, providing a secure hold. Note: Do not use putty for large or heavy products.
- Small Nails: For larger products, we recommend using small nails (not included) to secure the item to the wall. Nails with small heads allow the product to sit flush against the wall. Tip: Leave a 0.5 mm gap between the nail and the wall to make removal easier. If needed, you can pull the nail out with pliers without damaging the product.
- Assembly Adhesive: Assembly adhesive is another option for wall mounting. However, removing it later may be challenging and could damage the plaster.
{PRODUCTS 5190,5189,6094}
Additional Notes:
- Indoor Use Only: These products are intended for indoor use. Avoid placing them outdoors or in damp or wet areas.
- Customer Responsibility: The customer is responsible for proper installation. We are not liable for detachment or failure of the product due to wall composition, temperature, or incorrect installation.
- Removing Products with Foam Tape: Foam adhesive tape is strong. If removal is needed, carefully cut the foam behind the product using a thin knife, then peel off any remaining foam from the wall.
- Visual Layout Tip: For multi-part products, arrange the parts on the floor as a guide before transferring them to the wall.
FAQ
An assembly manual is provided with every order.
The assembly instructions for a specific product can always be found on the product page next to the product description tab.
General wall mounting instructions for our products can be found HERE.
If you are interested in a size that is in between the ones we offer, please email us with your request at dublez@dublez.com . If you would like an even larger size than what is listed, also contact us via email. Our graphic department will assess whether it is possible to produce a different size.
All our products are manufactured in our DUBLEZ workshop in Slovakia (Europe). 95% of the materials we use for our products are produced in the EU, with nearly all coming from the Czech Republic/Slovakia. Products from our main material supplier meet the strictest standards enforced by the California Air Resources Board which applies stringent quality control conditions for air quality and pollutants. Additionally, the supplier's products are certified by the Programme for the Endorsement of Forest Certification (PEFC), and the wood used for these products comes from verified and well-managed forests, ensuring a renewable and sustainable source.
It is possible to detect a certain smell or odor from our products upon unpacking. Some may find this smell pleasant, while others may not. It is an aroma that results from the manufacturing process. The smell will naturally dissipate within 10 days of unpacking.
The foam tape you applied to the wall is very strong. The product will definitely not fall off the plaster. If you decide to remove the sign after some time, we recommend proceeding very carefully. Ideally, it would be best to first cut the foam from the wall with a long sharp knife from behind the product, and then carefully peel off the remainder that stays on the wall. Since there are various types of plasters, it is necessary to also adapt to the structure and composition of yours.
Since we manufacture products from wooden materials, the answer is debatable. If the product is not directly exposed to rain or splashing water, it should not be a problem. However, it is necessary to consider the varying humidity of the outdoor air and temperature. As wood is a living material, these fluctuations can cause, for example, slight bending of the material. Therefore, in such cases, we recommend mounting the product on the wall with small-headed nails. Thanks to the nail heads, the product will be securely pressed against the wall, ensuring its stability. The number of nails depends on the product.
Since the products are made to order, once the order is placed, they are scheduled for production. The speed of scheduling depends on the selected shipping method. The delivery time is approximate and may be shorter or longer. In case of an extended order processing time, we will promptly inform the customer.
On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
All products are placed in the production queue the moment the order is sent. The material required for production is always in stock. On the product page, you can see the nearest delivery date. This date is valid if the "Express Delivery" option is chosen.
All types of shipping along with their delivery times can be found HERE.
After selecting the decor and size, you need to Add the product to the cart. The shopping cart is located on the page at the top right. You then need to fill in: email address, billing and shipping details, choose a shipping method and payment method. Finally, just send the order.
If you still have trouble ordering, it is possible that you made a mistake in one of the steps of the shopping process. In this case, we recommend reading the guide on how to order. The guide advises the customer "step by step". If you still have issues with purchasing, please contact our customer support.
Yes, we safely package our products to ensure they arrive in good condition. Most products are placed in a protective template, and all products are further wrapped in bubble wrap. They are delivered in sturdy cardboard made from 5-layer corrugated board.
It is possible that most of our products are received in a protective wooden template made of the same material as the product. This template is attached to the product with paper adhesive tape on the back. After peeling off the paper tape, you can easily remove the product from the template. The template serves to safely transport the goods to you, to prevent damage to the product. The template is packaging material and is not part of the product itself. Damage to the template cannot be considered as a claim against the goods, as it is packaging material and serves only for the safe delivery of the goods.
If you did not receive a confirmation email when sending the order or if you are not receiving emails related to order changes, one of the following scenarios may have occurred:
- Your email was sent to spam - In this case, it is necessary to check the "spam" or "junk mail" folder. With G-mail and other email providers, it can happen that the provider marks the email as spam.
- The email address entered in the order is incorrectly written - When sending an order, it is important that the email address filled out is valid. In this case, we recommend contacting our customer support, where we can change the email to the correct one and you will also receive an email with the order.
- Your email inbox is full - If your email inbox is full, it is not possible to receive new emails, including emails from us. To be able to receive emails, it is necessary to free up space in the email inbox, e.g., by deleting older emails.
- You did not send the order - If the order was not sent at checkout with the button used to send the order and you were not redirected to a thank you screen, it is likely that the order was not sent. In this case, we also recommend contacting customer support.
Almost all of our products feature a small, subtle logo of our company. The logo is tiny and not very noticeable. If you would like to remove the logo nonetheless, so that it is not engraved on the product, it is possible. You will need to inform us in advance so that we can add this service to your order.
You can add this service through the following link HERE.
We are both a manufacturer and a seller. This allows us to keep quality under control :) Take a look behind the scenes of production at DUBLEZ and discover how your dream home decorations are made. We manufacture from wood, using the most advanced technologies on the market, with an emphasis on quality and detail of execution. We guarantee safe packaging of products, ensuring that they arrive safely at your home.
Choose reliability and shop with us:
- We are a verified manufacturer
- Suitable for all plasters
- 99% customer satisfaction
- Easy installation
- Free exchange within 30 days
- 3-year warranty
